Spool Hi-Speed Hyper-Speed MRP Ceramic Lubricant
Spool Speed MRP is immediately activated by friction. Therefore eliminating friction by metal impregnation creating magnetic repulsion polarity. The SS surface of the bearings creates a + charge and the MRP creates a - charge not only forcing the lubricant into all asperities of the SS race but creating a smoother transition allowing all functions to run with less friction. MRP remains in place regardless of operational factors and NOT just a coating like any competition.
**Tuning secret: Add 1 drop of Spool Speed MRP to your Spool Speed bearing, spin the bearing a few spins. Make sure the bearing reaches at least 89 degrees. Do not overheat the bearing. Use care when deciding on your heat source! 89 degrees is easily reached by letting your bearings sit in the sun for a short time. We do NOT recommend hair dryers, open flames or ovens! The 89 degree temp activates the MRP additive. Add 4 drops of red can CRC Brake Kleen available from the automotive section in Wal-Mart. Spin the bearing a few more spins. Finally, use eye protection and skin protection and flush the bearing with a quick burst of Brake Kleen. Dip a toothpick in a drop of our MRP lube and scrape it across the top race of the bearing allowing the miniscule amount of lube to enter the race of the bearing. Less is more! Do not over lube the bearing. You'll now have the fastest, smoothest and quietest ceramic bearing you've ever used!
*Do not use an open flame at any time during this process. Adhere to the warnings listed on the Brake Kleen can!
*Spool Speed MRP works wonders for factory bearings!